Designing a new high school to be 40 percent more efficient than ASHRAE 90.1 – 2001 energy requirements is a feat in itself. To achieve this degree of efficiency on a very limited capital budget while designing a state-of-the-art, energy-demanding technical high school is an even greater feat. This is exactly what the StudioJAED architectural and engineering firm accomplished at the Providence Career and Technical Academy (PCTA) in Providence, R.I., to comply with the design requirements of the Northeast Collaborative for High Performance Schools (NE-CHPS).
PCTA opened its doors to its first class of students on Sept. 2, 2009, after 212,000 square feet of
new construction plus 72,000 square feet of renovation in the previously existing Hanley
Classroom Building. Now one of New England’s premier technical high schools, PCTA features
high-tech classrooms, equipment, labs, media centers, athletic facilities, and other amenities for a
high-quality education. The school offers nine vocational programs including HVAC,
automotive technology, construction technology, cosmetology, and culinary arts, in addition to a
required college-prep curriculum of math, science, and English.
The school building was designed to satisfy the full requirements of NE-CHPS, whose mission is
to promote school environments that are not only energy- and resource-efficient, but also
healthy, comfortable, and well lit. Oftentimes, highly efficient buildings mean premium costs.
Because PCTA, like many public schools, was no stranger to budget constraints, designers had to
limit initial costs in creative ways.
Cost Savings with Energy Recovery
A major design directive to save on construction costs led PCTA to install a dual–temperature,
two-pipe HVAC system. In contrast to the more common four-pipe system where heating and
cooling are available at any time, two-pipe systems cannot engage cooling coils to reduce
humidity on cool, damp days while in the heating mode. The solution to this dilemma was to
install Airxchange® energy recovery wheels containing a silica-gel desiccant for moisture transfer.
By rotating between building exhaust and outdoor intake air streams, the wheels remove
moisture from outdoor air on damp days and reject it into the exhaust airstream to keep indoor
relative humidity at a comfortable level.
Engineer Brian Zigmond, a principal of StudioJAED, said, “Since the school utilizes a two-pipe
system, we needed a way to mitigate humidity issues typical to the area during shoulder seasons.
Rejecting as much humidity as possible back to the outdoors with an energy recovery wheel is
the most practical solution available. We’ve had success with implementing energy recovery
wheels in new and existing schools. Given school budget constraints, installing energy recovery
wheels to save on upfront and operating costs is a no-brainer.”
Reducing Outdoor Air Load
StudioJAED also realized during the planning phase that energy recovery would have to be
incorporated into the design of PCTA’s HVAC system if the 40 percent energy-reduction goal
were to be achieved. The team chose to utilize a combination of air-handling units and standalone energy recovery ventilators (ERVs) with Airxchange® energy recovery wheels to provide
outdoor air to PCTA’s new and retrofitted classrooms, labs, auditorium, and media center. The
Airxchange® wheels help to condition 45,215 cfm of outdoor air by continuously recycling the
heating or cooling energy (depending on the season) from the exhaust airstream. On peak design
days, the energy recovery wheels reduce the outdoor air load by as much as 80 percent.
The ability of Airxchange® wheels to save on energy is evident at PCTA, especially during the
heating season. In the first winter of operation, PCTA facility manager David Gaudet kept his
eye on the boilers to ensure they were able to handle the load. He was surprised at how
infrequently the boilers actually started up.
“I kept waiting for the boilers to fire on cold days,” Gaudet said. “But the energy recovery
wheels were able to heat the outdoor air enough to significantly reduce boiler operation. The
wheels keep the supply air in a nice, comfortable zone where frequent additional heating is not
required.”
With rising fuel prices, the conditioning provided by the Airxchange® wheels to reduce boiler
operation generates tremendous cost savings. PCTA HVAC technician Brian Polak added that he
was able to shut down the entire boiler system for a few hours to perform emergency work
during one of the coldest days of the winter without the system being negatively affected. The
ERV/air-handling unit system with Airxchange® wheels keeps the school in a comfortable zone.
PCTA operates in the 43 kBtu/square foot range, which is about 40 percent lower than the
national average for all high schools, not just technical schools. The improved efficiency yields
huge savings on utility bills. Through their reduction in outdoor air load, Airxchange® energy
recovery wheels account for an estimated $28,000 in annual utility savings. Because of PCTA’s
Northeast location, the majority of the savings are realized in the heating months, but because
Airxchange® wheels exchange moisture and maintain indoor air quality, they benefit the school
year-round.
For more information, visit www.airxchange.com.